CLARKE MIG/TIG WELDER MIG200 S-MULTI 200A /MMA SYNERGIC INVERTER WELDER
New
CLARKE MIG/TIG WELDER MIG200 S-MULTI 200A /MMA SYNERGIC INVERTER WELDER
The Clarke MIG200 S-MULTI 200A MIG/TIG/MMA INCLUDES vat AND DELIVERY Synergic Inverter Welder is a high quality and versatile, multi-functional welder utilising the latest synergic and inverter technology to provide ease of use whilst achieving good quality welds.
Synergic is a complex and advanced technology which simplifies the welding process by taking out all of the guesswork, presented on a user-friendly and intuitive LED display. When setting the product up, the user selects which type of welding they wish to undertake, is then prompted to make a selection on type of wire and gas used and using these inputs, the intelligent Synergic technology calculates the power and wire feed speed, to produce the ideal welding parameters. The process is simple, intuitive and allows the welder to be setup up to use within seconds, saving time and effort.
Supplied with:
1 x MB 25AK Torch (1.2mm tip fitted for aluminium welding
1 x Electrode Holder & Lead
1 x Earth Clamp & Lead
1 x Chipping Hammer & Wire Brush
1 x Set V Rollers V0.8/1.0mm (2pc in box)
3 x Hose Clips
2 x 0.8mm Tip (for MSW 0.8mm wire)
2 x 1.0mm Tip (for MSW 1.0mm wire)
2 x 1.0mm Tip (for aluminium wire)
2 x 1.2mm Tip (for Aluminium wire)
1 x Wire Liner (Spring liner for Steel/Stainless Steel)
1 x Tip Changing Spanner
Synergic is a complex and advanced technology which simplifies the welding process by taking out all of the guesswork, presented on a user-friendly and intuitive LED display. When setting the product up, the user selects which type of welding they wish to undertake, is then prompted to make a selection on type of wire and gas used and using these inputs, the intelligent Synergic technology calculates the power and wire feed speed, to produce the ideal welding parameters. The process is simple, intuitive and allows the welder to be setup up to use within seconds, saving time and effort.
Supplied with:
1 x MB 25AK Torch (1.2mm tip fitted for aluminium welding
1 x Electrode Holder & Lead
1 x Earth Clamp & Lead
1 x Chipping Hammer & Wire Brush
1 x Set V Rollers V0.8/1.0mm (2pc in box)
3 x Hose Clips
2 x 0.8mm Tip (for MSW 0.8mm wire)
2 x 1.0mm Tip (for MSW 1.0mm wire)
2 x 1.0mm Tip (for aluminium wire)
2 x 1.2mm Tip (for Aluminium wire)
1 x Wire Liner (Spring liner for Steel/Stainless Steel)
1 x Tip Changing Spanner
- Suitable for MIG, TIG & MMA Welding
- Min/Max Output Current: 20A - 200A
- Electrode Diameter: 1.6 - 4mm (MMA) / 1.6 - 2.4mm (TIG)
- Input voltage: 230V/50Hz
- Maximum Input Current (Max/Eff): 38A / 14.7A
- Welding thickness: 1.0 - 8.0mm (Mig) 1.0 - 6.0mm (Tig) 1.0 - 6.0mm (MMA)
- Peak Input Power: 8740W
- Clarke TK13 (6012239), gas regulator & gas required for TIG welding
NORMALLY SHIPS WITHIN 1 WORKING DAY if ordered before 2pm.
VAT included in price and Free shipping in most areas (See here for excluded Zones)
This is made by Clarke International Ltd and is covered by their manufacturers guarantee for 12 months limited to the cost of the repairing or replacing the item.
It is the sole responsibility of the Customer to comply with the manufacturer's recommendations for installation, commissioning, operation and maintenance of the Item. In the event of replacement or repair during the manufacturer's guarantee period, or after, our liability is limited to the cost of the repairing or replacing the item. RRP INCLUDES vat AND DELIVERY
£669.99
£716.40
RRP: £716.40